Bonnet Guard/Protector (Jimny 2018+)

$180.00 inc. GST

In stock

Ready to shine? Tag us @jimnyhype on Instagram for your moment in the spotlight on our product page!

Please refer to the Product Details section to confirm if this product is compatible with your Jimny.

Elevate your Jimny’s style while safeguarding it from the hazards of the road with the JimnyHype Bonnet Guard. Crafted from durable black ABS plastic, this innovative accessory not only adds a touch of aggression to your Jimny’s aesthetic but also provides reliable protection against stone chips, bug splatters, and debris.

Features:

  • Made from durable black ABS plastic
  • Provides reliable protection against stone chips, bug splatters, and debris
  • Easy installation process, no tools required
  • Utilizes strong adhesive for secure fit
  • Innovative design eliminates the need for drilling

Benefits:

  • Protects your vehicle from costly repairs due to stone chips, bug splatters, and debris
  • Enhances the aesthetic appeal of your Jimny with a sleek, aggressive look
  • Saves time and effort with quick and tool-free installation process

Note:

  1. Before installation, thoroughly clean the surface where the tape will adhere. Remove any dust, dirt, or debris to ensure a clean and smooth bonding surface.
  2. Proper alignment is crucial to prevent the product from falling off and to ensure it is water-resistant. Check the alignment with the edges and contours, ensuring there are no gaps.
  3. Common mistake is tempting to apply pressure to the bonnet guard in hopes that the adhesive will compensate for the misalignment. While this might work temporarily (1-3 months), correct alignment is crucial for long-term adhesion and performance.
  4. Misalignments can result in gaps between the product and your Jimny, allowing water or dirt to penetrate and causing the adhesion to weaken over time.
  5. If you notice any gaps or misalignment after installation, it is likely due to improper alignment during the initial setup.
  6. The included tape has been tested to hold very well if the product is properly aligned during installation.
  7. Avoid exposing the product to water for at least 48 hours after installation to allow the adhesive to fully bond for optimal performance.
  8. The tape is for one-time use only. Replace the double-sided tape for reinstallation.
  9. The provided tape was chosen to protect your Jimny while providing enough adhesive to hold the product securely. Be aware that using alternative attachment methods may cause permanent damage or marks to your paintwork, such as permanent bond tape (Gorilla Tape, 3M VHB Tape, etc.).

Package Includes:

  • 1x JimnyHype Bonnet Guard
  • 1x Extra Set Adhesive
  • 1x Adhesion promoter
  • 1x Installation guide

Elevate your Jimny’s style and protect it from the elements today with the JimnyHype Bonnet Guard. Don’t compromise on style or protection – order now and experience the difference!

SKU BGP-1966-LH-BLK-EXT
Colour

Black

Model

, ,

Transmission

Auto Tranmission, Manual Transmission

Installation Method

Adhesive

Installation Time

Within 30min

Po Box

Not Accept

Package Weight 1.62 kg
Package Dimension 134 × 23 × 12 cm

1 review for Bonnet Guard/Protector (Jimny 2018+)

  1. Kerrie Fairley

    The adhesive doesn’t hold the protector in place for too long. It gave out after 3 months.

Add a review

Hey there! Interested in a product but have a few questions? Just drop us a line here and we’ll get back to you in a jiffy!

Do not use iiNet webmail! iiNet commonly experiences bounce backs. Use iiNet webmail at your own risk, as there may be no response. All other email services are functioning fine.
Po Box address

Please note that deliveries to PO Box addresses may not be possible for certain products, as their size may exceed the limitations set by Australia Post. If you anticipate issues with receiving packages at a PO Box or prefer not to have deliveries left unattended, we advise using a workplace address for delivery.

Product specifications will indicate whether the item is suitable for delivery to a PO Box or not. If you have any questions or concerns regarding delivery options, feel free to contact us at info@jimnyhype.com.

Domestic estimate delivery timeframe
Delivery Location Time Frame
Metro NSW, VIC, QLD 2-5 business days
Regional NSW, VIC, QLD 4-7 business days
ACT 3-7 business days
WA 10-16 business days
SA 4-10 business days
TAS 6-12 business days
NT 8-16 business days
Please note that delivery estimates should be used as a general guide only.

Shop with confidence knowing that at JimnyHype, we’ve got your back with our robust return policy. We understand that sometimes things don’t go as planned, so we offer Change of Mind Returns within 30 days of purchase.

There’s no rush to buy your accessories – if you haven’t received your Jimny yet, hold off on purchasing accessories until it arrives. This ensures you won’t miss the chance to return them if needed, as our return window begins upon purchase.

We’re all about making sure you’re happy, and we’re here to make sure your time with us is awesome. For more information, please visit our Return Policy.

Elevate your Jimny’s style while safeguarding it from the hazards of the road with the JimnyHype Bonnet Guard. Crafted from durable black ABS plastic, this innovative accessory not only adds a touch of aggression to your Jimny’s aesthetic but also provides reliable protection against stone chips, bug splatters, and debris.

Features:

  • Made from durable black ABS plastic
  • Provides reliable protection against stone chips, bug splatters, and debris
  • Easy installation process, no tools required
  • Utilizes strong adhesive for secure fit
  • Innovative design eliminates the need for drilling

Benefits:

  • Protects your vehicle from costly repairs due to stone chips, bug splatters, and debris
  • Enhances the aesthetic appeal of your Jimny with a sleek, aggressive look
  • Saves time and effort with quick and tool-free installation process

Note:

  1. Before installation, thoroughly clean the surface where the tape will adhere. Remove any dust, dirt, or debris to ensure a clean and smooth bonding surface.
  2. Proper alignment is crucial to prevent the product from falling off and to ensure it is water-resistant. Check the alignment with the edges and contours, ensuring there are no gaps.
  3. Common mistake is tempting to apply pressure to the bonnet guard in hopes that the adhesive will compensate for the misalignment. While this might work temporarily (1-3 months), correct alignment is crucial for long-term adhesion and performance.
  4. Misalignments can result in gaps between the product and your Jimny, allowing water or dirt to penetrate and causing the adhesion to weaken over time.
  5. If you notice any gaps or misalignment after installation, it is likely due to improper alignment during the initial setup.
  6. The included tape has been tested to hold very well if the product is properly aligned during installation.
  7. Avoid exposing the product to water for at least 48 hours after installation to allow the adhesive to fully bond for optimal performance.
  8. The tape is for one-time use only. Replace the double-sided tape for reinstallation.
  9. The provided tape was chosen to protect your Jimny while providing enough adhesive to hold the product securely. Be aware that using alternative attachment methods may cause permanent damage or marks to your paintwork, such as permanent bond tape (Gorilla Tape, 3M VHB Tape, etc.).

Package Includes:

  • 1x JimnyHype Bonnet Guard
  • 1x Extra Set Adhesive
  • 1x Adhesion promoter
  • 1x Installation guide

Elevate your Jimny’s style and protect it from the elements today with the JimnyHype Bonnet Guard. Don’t compromise on style or protection – order now and experience the difference!

SKU BGP-1966-LH-BLK-EXT
Colour

Black

Model

, ,

Transmission

Auto Tranmission, Manual Transmission

Installation Method

Adhesive

Installation Time

Within 30min

Po Box

Not Accept

Package Weight 1.62 kg
Package Dimension 134 × 23 × 12 cm

1 review for Bonnet Guard/Protector (Jimny 2018+)

  1. Kerrie Fairley

    The adhesive doesn’t hold the protector in place for too long. It gave out after 3 months.

Add a review

Hey there! Interested in a product but have a few questions? Just drop us a line here and we’ll get back to you in a jiffy!

Do not use iiNet webmail! iiNet commonly experiences bounce backs. Use iiNet webmail at your own risk, as there may be no response. All other email services are functioning fine.
Po Box address

Please note that deliveries to PO Box addresses may not be possible for certain products, as their size may exceed the limitations set by Australia Post. If you anticipate issues with receiving packages at a PO Box or prefer not to have deliveries left unattended, we advise using a workplace address for delivery.

Product specifications will indicate whether the item is suitable for delivery to a PO Box or not. If you have any questions or concerns regarding delivery options, feel free to contact us at info@jimnyhype.com.

Domestic estimate delivery timeframe
Delivery Location Time Frame
Metro NSW, VIC, QLD 2-5 business days
Regional NSW, VIC, QLD 4-7 business days
ACT 3-7 business days
WA 10-16 business days
SA 4-10 business days
TAS 6-12 business days
NT 8-16 business days
Please note that delivery estimates should be used as a general guide only.

Shop with confidence knowing that at JimnyHype, we’ve got your back with our robust return policy. We understand that sometimes things don’t go as planned, so we offer Change of Mind Returns within 30 days of purchase.

There’s no rush to buy your accessories – if you haven’t received your Jimny yet, hold off on purchasing accessories until it arrives. This ensures you won’t miss the chance to return them if needed, as our return window begins upon purchase.

We’re all about making sure you’re happy, and we’re here to make sure your time with us is awesome. For more information, please visit our Return Policy.

Description

Elevate your Jimny’s style while safeguarding it from the hazards of the road with the JimnyHype Bonnet Guard. Crafted from durable black ABS plastic, this innovative accessory not only adds a touch of aggression to your Jimny’s aesthetic but also provides reliable protection against stone chips, bug splatters, and debris.

Features:

  • Made from durable black ABS plastic
  • Provides reliable protection against stone chips, bug splatters, and debris
  • Easy installation process, no tools required
  • Utilizes strong adhesive for secure fit
  • Innovative design eliminates the need for drilling

Benefits:

  • Protects your vehicle from costly repairs due to stone chips, bug splatters, and debris
  • Enhances the aesthetic appeal of your Jimny with a sleek, aggressive look
  • Saves time and effort with quick and tool-free installation process

Note:

  1. Before installation, thoroughly clean the surface where the tape will adhere. Remove any dust, dirt, or debris to ensure a clean and smooth bonding surface.
  2. Proper alignment is crucial to prevent the product from falling off and to ensure it is water-resistant. Check the alignment with the edges and contours, ensuring there are no gaps.
  3. Common mistake is tempting to apply pressure to the bonnet guard in hopes that the adhesive will compensate for the misalignment. While this might work temporarily (1-3 months), correct alignment is crucial for long-term adhesion and performance.
  4. Misalignments can result in gaps between the product and your Jimny, allowing water or dirt to penetrate and causing the adhesion to weaken over time.
  5. If you notice any gaps or misalignment after installation, it is likely due to improper alignment during the initial setup.
  6. The included tape has been tested to hold very well if the product is properly aligned during installation.
  7. Avoid exposing the product to water for at least 48 hours after installation to allow the adhesive to fully bond for optimal performance.
  8. The tape is for one-time use only. Replace the double-sided tape for reinstallation.
  9. The provided tape was chosen to protect your Jimny while providing enough adhesive to hold the product securely. Be aware that using alternative attachment methods may cause permanent damage or marks to your paintwork, such as permanent bond tape (Gorilla Tape, 3M VHB Tape, etc.).

Package Includes:

  • 1x JimnyHype Bonnet Guard
  • 1x Extra Set Adhesive
  • 1x Adhesion promoter
  • 1x Installation guide

Elevate your Jimny’s style and protect it from the elements today with the JimnyHype Bonnet Guard. Don’t compromise on style or protection – order now and experience the difference!

Product Details
SKU BGP-1966-LH-BLK-EXT
Colour

Black

Model

, ,

Transmission

Auto Tranmission, Manual Transmission

Installation Method

Adhesive

Installation Time

Within 30min

Po Box

Not Accept

Package Weight 1.62 kg
Package Dimension 134 × 23 × 12 cm
Reviews (1)

1 review for Bonnet Guard/Protector (Jimny 2018+)

  1. Kerrie Fairley

    The adhesive doesn’t hold the protector in place for too long. It gave out after 3 months.

Add a review

Product Enquiry

Hey there! Interested in a product but have a few questions? Just drop us a line here and we’ll get back to you in a jiffy!

Do not use iiNet webmail! iiNet commonly experiences bounce backs. Use iiNet webmail at your own risk, as there may be no response. All other email services are functioning fine.
Shipping
Po Box address

Please note that deliveries to PO Box addresses may not be possible for certain products, as their size may exceed the limitations set by Australia Post. If you anticipate issues with receiving packages at a PO Box or prefer not to have deliveries left unattended, we advise using a workplace address for delivery.

Product specifications will indicate whether the item is suitable for delivery to a PO Box or not. If you have any questions or concerns regarding delivery options, feel free to contact us at info@jimnyhype.com.

Domestic estimate delivery timeframe
Delivery Location Time Frame
Metro NSW, VIC, QLD 2-5 business days
Regional NSW, VIC, QLD 4-7 business days
ACT 3-7 business days
WA 10-16 business days
SA 4-10 business days
TAS 6-12 business days
NT 8-16 business days
Please note that delivery estimates should be used as a general guide only.
Returns

Shop with confidence knowing that at JimnyHype, we’ve got your back with our robust return policy. We understand that sometimes things don’t go as planned, so we offer Change of Mind Returns within 30 days of purchase.

There’s no rush to buy your accessories – if you haven’t received your Jimny yet, hold off on purchasing accessories until it arrives. This ensures you won’t miss the chance to return them if needed, as our return window begins upon purchase.

We’re all about making sure you’re happy, and we’re here to make sure your time with us is awesome. For more information, please visit our Return Policy.

You may also like…

Out of stock
Out of stock
Out of stock
-21%
Original price was: $125.00.Current price is: $99.00. inc. GST
Bonnet Guard/Protector (Jimny 2018+)

In stock